High-Frequency Welding of Household
What is a Filter Drier?
The filter drier consists of two parts: a dryer and a filter. In the refrigerator refrigeration system, it is generally installed in the condensation outlet and capillary inlet. One of the functions of the filter drier is to filter the impurities in the refrigeration system, such as various metal oxides and dust, etc. The main function is to absorb the moisture in the system. When cooling, the refrigerant comes out of the condenser, which is medium temperature and high pressure. Liquid, if there is water in the system, it is also liquid for easy absorption.
What is the Customer's Request This Time?
The welding process of the filter drier in the air-conditioning accessories is relatively mature, and the commonly used welding process is manual flame brazing. However, manual flame brazing has problems such as smoke, noise, low efficiency, pollution, poor consistency, etc., which can no longer meet the requirements of modern enterprises for high quality, high efficiency, and low energy consumption. In response to various problems.
Customers Put forward the Following Requirements.
1)After the product is soldered, there should be no leakage, the surface of the solder is evenly and beautifully stacked, and the penetration depth reaches the standard.
2)Welding cycle requires 6s/piece.
3)Avoid internal oxidation.
4)Use automatic wire feeding to realize automatic welding process; In response to the customer's requirements, we have an in-depth interpretation of the needs, and we have designed a set of automated filter welding equipment.